The advantages ofcold-rolled-stainless-steel-coil-din17224: great width selection in coils, excellent dimensional accuracy, available in austenitic, ferritic, duplex and martensitic grades, with wide variety of special surfaces. In addition, their standard and special surface finishes provide a unique level of customization.

cold-rolled-stainless-steel-coil-din17224 products can be produced in a variety of widths, depending on the gauge required. Using the modern technology, an entire range of coil can be produced to the tightest tolerance.

cold-rolled-stainless-steel-coil-din17224 Specifications

Thickness	0.1mm to 12 mm Thk
Width	1000 mm / 1219mm /1250 mm / 1500 mm / 2000 mm
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, AS PER CUSTOMER’S REQUIREMENT
Type of Material	STAINLESS STEEL SOFT, DEEP DRAW, EXTRA DEEP DRAW, QUARTER HARD, HALF HARD, FULL HARD.
Form	Coil / Strip
Test Certificate	Yes.
Finish	2B, 2D, 2H, 2R, No.4, HAIRLINE, SCOTCH BRITE, SATIN FINISH, NO.8, BA.
Make	POSCO TISCO, BAOSTEEL AND MANY MORE MILLS.
Standard	ASTM / ASME A240 / SA240

cold-rolled-stainless-steel-coil-din17224 is a stainless steel product produced by passing an unheated metal piece through rolls, resulting in a sheet or strip with improvements in surface imperfections and mechanical properties, with little occurrence of defects such as seams and slivers according to the process conditions. cold-rolled-stainless-steel-coil-din17224 is used for thickness reduction and can be associated with other improvement steps, such as annealing, tempering, and edging, depending on the application of the final product, and an already rolled stainless steel plate can undergo the same process to achieve a further reduction and properties enhancement. At the end of the process, the metal sheet is coiled and prepared to be marketed.