DX51D+Z Galvanized Steel Coil

DX51D cold rolled galvanized coils are used for cold forming by bending and profiling. DX51D galvanized coils are produced according to EN 10346. The thickness of the zinc coating varies depending on consumers’ requirements.

DX51D galvanized coils are widely used for the production of steel structures, roofs, window profiles, drainage and ventilation systems, roads barriers, bridges, and household appliances (cases and internal parts).

DX51D steel products are produced in coils 0.1-3.0 mm thick and 950-1650 mm wide. The inner diameter of the coil is 600±20 mm and outer diameter is up to 1300 mm. Coil weight is up to 5~10 tons. Coils are supplied with cut edges (mill edges are also possible).

DX51D+Z Galvanized Steel Coil

Standard	ASTM A653, AISI, DIN, GB
Grade	DX51D+Z , SGCC , JIS3302, ASTM653M ,SGCH
Thickness	0.12mm-4.0mm
Width	750mm-1250mm
Zinc Coating	40g-220g /m2
Spangle	zero spangle, regular spangle or normal spangle
Hardness	soft or hard
Surface treatment	chromated and oiled, chromated and non-oiled,Anti-finger
Packing	waterproof paper+plastic film+iron packing+bundling or as per customers request.
Coil Weight	3-8Mt or as per requirement.
Application	Corrugated steel sheet,Ceiling channel,industrial refrigeration,cold storage,door panel,sandwich panel,PU panel,writing board,PCM steel plate
Brand	Tangsteel, HBIS, Ansteel, and other for thin size.
Payment	T/T, L/C
Delivery Time	In 30 after receipt advance or LC
Min order	25 Mt (one 20ft FCL)