Mechanical Properties

The mechanical properties of grade 405 annealed stainless steel are displayed in the following table.

Properties	Metric	Imperial
Tensile strength	448 MPa	65000 psi
Yield strength (@strain 0.200 %/)	276 MPa	40000 psi
Elastic modulus	200 GPa	29007 ksi
Poisson's ratio	0.27-0.30	0.27-0.30
Elongation at break (in 50 mm)	25.00%	25.00%
Izod Impact (@20°C/68°F)	41.0 J	30.2 ft-lb
Hardness, Brinell (converted from Rockwell B hardness)	131	131
Hardness, Knoop (converted from Rockwell B hardness)	146	146
Hardness, Rockwell B	75	75
Hardness, Vickers (converted from Rockwell B hardness)	140	140

201 stainless steels coil

Standard Specification

Thickness	0.1mm-12mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	Since the custom
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Finish	Hot rolled coil (HR), Cold rolled coil (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form	Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats, Blank (Circle), Ring (Flange) etc.

201 stainless steels

Cold rolled 300 series stainless steel strip 2B BA finish

These steel strips 316 are widely used in industrial applications where reliability and assurance matters a lot. The offered steel strips 316 is manufactured using quality raw steel, progressive technology and under the supervision of deft professionals. In addition with, clients can get the 316 Stainless steel strips from us within the stipulated time frame.