z2cnd18-12-cold-rolled-stainless-steel-coil have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling. High flatness, high surface finish, clean and bright surface of cold-rolled sheet. It is easy to be coated and processed and has the characteristics of high stamping performance and low yield point, so cold-rolled steel coil has a wide range of uses, mainly used in automobiles and building materials. At the same time, it is also the substrate for the production of galvanized steel sheets in coil and galvalume steel coil.
z2cnd18-12-cold-rolled-stainless-steel-coil Chemical Composition(%)

C	Mn	P	S	Si	Cr	Ni	Nb	N	Ti
≤0.03	≤1.00	≤0.04	≤0.03	<1.0	17.5 – 19.5	≤1.00	0.3 + (9 x C) min 0.90 max	≤0.03

z2cnd18-12-cold-rolled-stainless-steel-coil is low-carbon hot-rolled steel that has been rolled at room temperature, below its recrystallization temperature. The steel is then cleaned of oxide scale and finished in a specific series of rolling to just over the desired thickness, heating to controlled temperatures, and final rolling to the desired thickness. This produces steel with a close thickness tolerance (+/-.0015” or better) and a wide range of controlled surface finishes.