Gnee Steel (tianjin) Co., Ltd
+8615824687445

Automotive steel

Apr 02, 2024

Currently, the overall performance requirements for automotive materials are high strength, fatigue resistance, creep resistance, high temperature resistance, solvent resistance, dimensional stability, excellent electrical properties, etc., which puts forward higher requirements for domestic automotive materials. Among automobile body materials, metal materials account for nearly 90%, of which 70% are steel materials, 20% are aluminum alloys, magnesium alloys, etc., and engineering plastics, carbon fiber and other materials account for about 10%. Taking into account cost, safety, lightweight and other characteristics, steel will still be the most suitable material for automobile bodies for a long time.

high performance metals
Auto steel
automotive steel sheet
Cold rolled steel automotive

According to the strength level, automotive steel can be divided into three categories: low carbon steel, ordinary high-strength steel and advanced high-strength steel.


1. Mild steel
Low carbon steel mainly refers to low carbon aluminum-killed steel or interstitial-free steel (IF steel). It has low yield strength and high elongation after break. It has excellent plastic processing properties and is very suitable for the production of complex parts and can be used in car doors. Plate, spare tire compartment, wheel cover plate and other deep drawing and ultra-deep drawing products are used for stamping. In particular, interstitial-free steel is made by adding an appropriate amount of titanium and/or niobium to ultra-low carbon steel. The interstitial atoms (carbon, nitrogen) in the steel exist in the form of carbides and nitrides, reducing the interstitial solid solution atoms in the steel. , giving it better formability.

 

2. Ordinary high-strength steel
Common high-strength steels include four categories: phosphorus-added high-strength steel, high-strength IF steel, bake-hardened steel and low-alloy high-strength steel.
Phosphorus-added high-strength steel refers to adding no more than 0.12% of solid solution strengthening elements such as phosphorus to ultra-low carbon steel (based on interstitial-free steel) or low carbon steel (based on low-carbon aluminum-killed steel) to improve The strength of steel. This steel has high strength and good cold forming properties, as well as good impact resistance and fatigue resistance, and is often used to make automotive panels or structural parts.

High-strength IF steel improves the plastic strain ratio (r value) and strain hardening index (n value) of the steel by controlling the chemical composition of the steel. Due to the solid solution strengthening effect of the alloying elements in the steel and the absence of interstitial atoms, this steel has both high strength and excellent cold forming properties. It is usually used to make complex parts that require deep drawing.

 

Bake-hardened steel retains a certain amount of solid solution carbon and nitrogen atoms in the steel, and the strength of the steel can be improved by adding strengthening elements such as phosphorus and manganese. After being processed and formed, and baked at a certain temperature, the yield strength of the steel is significantly increased due to age hardening. It is usually used in automotive exterior panels that require higher bake hardening performance.

Low-alloy high-strength steel is made by adding single or composite micro-alloying elements such as niobium, titanium, and vanadium to low-carbon steel to form carbonitride particles and precipitate for strengthening. At the same time, the micro-alloying elements refine the grains to obtain a higher High strength, mainly used for structural parts and reinforcement parts with high flanging forming requirements.


3. Advanced high-strength steel
Advanced high-strength steel can minimize the weight of a vehicle without reducing its safety performance, thus meeting the energy-saving and emission-reduction requirements of the automotive industry.

 

Advanced high-strength steel mainly includes eight categories: dual-phase steel, enhanced formability dual-phase steel, phase transformation-induced plasticity steel, multi-phase steel, enhanced formability multi-phase steel, quenched partitioned steel, martensitic steel, and hot-formed steel.


The structure of Dual Phase Steel (DP steel) is mainly composed of ferrite and martensite. It has a low yield ratio, high work hardening performance, good uniform elongation and bake hardening performance. At the same yield strength level, dual-phase steel has higher strength than low-alloy high-strength steel, has no room temperature aging, and has good formability. At present, the strength level of dual-phase steel covers 450~1310MPa and is mainly used for structural parts and reinforcements.

 

The structure of Dual Phase Steel with Improved Formability (DH steel) is mainly composed of ferrite, martensite and a small amount of bainite or retained austenite. Compared with dual-phase steel with the same tensile strength, it has higher elongation and work hardening index. Therefore, this steel grade is suitable for parts with higher drawing requirements.

 

The structure of Transformation Induced Plasticity Steel (TR steel) is mainly composed of ferrite, bainite and retained austenite, and the content of retained austenite is not less than 5%. During the forming process, retained austenite can transform into martensite, so the steel has a high work hardening rate, uniform elongation and tensile strength. Compared with dual-phase steel with the same tensile strength, it has higher elongation.

 

The structure of Complex Phase Steel (CP steel) is mainly a small amount of martensite, retained austenite or pearlite distributed on a ferrite or bainite matrix, which is strengthened by fine graining or precipitation strengthening of micro-alloying elements. Compared with dual-phase steel with the same tensile strength, it has higher yield strength and good bending properties, and is mainly used for bending and flanging formed parts.

 

Complex Phase Steels with Improved Formability (CH steel) is based on the traditional complex phase steel structure (ferrite + martensite + bainite) and introduces the metastable phase of retained austenite. , martensite and bainite, giving it higher strength and higher hole expansion rate. The ferrite in steel can provide better plasticity, relying on the phase transformation-induced plasticity of retained austenite to obtain higher uniform elongation and total elongation. The multi-phase structure composite makes CH steel have high strength and It has high hole expansion performance and good elongation performance.

 

Quenching and Partitioning Steel (QP steel) is an ultra-high-strength steel with high formability produced using the quenching-partitioning process. The microstructure of steel is composed of multiple phases such as martensite + ferrite + retained austenite. It utilizes the ultra-high strength brought by martensite and the transformation induced plasticity (TRIP) of retained austenite. ) effect, achieving superior formability than traditional ultra-high-strength steel, with a medium yield-to-strength ratio and high work-hardening properties, and is suitable for body frame parts and safety parts with relatively complex shapes and high strength requirements.

The structure of Martensitic Steel (MS steel) is almost entirely martensite. It usually has high tensile strength and high yield ratio. It is mainly used for anti-collision parts and safety parts with high strength requirements. pieces.

 

Hot stamping steel (HS steel) is to heat the steel plate above the austenitizing temperature. The heated steel plate is stamped in the mold, forming and quenching are completed at the same time, and the austenite is transformed into a full martensite structure. Achieve precise stamping forming of high-strength parts and solve problems such as easy cracking of ultra-high-strength steel plates during cold stamping, severe springback, difficulty in forming complex parts, and severe mold loss. At present, the strength of hot-formed steel covers 1300 ~ 2000MPa, and is mainly used for structural parts and safety parts such as B-pillars and anti-collision beams.

 

To sum up, among metal structural materials, the strength and plasticity of steel have a wide adjustment range. At the same time, various processes such as casting, forging and welding can be used, and it is still widely used in the automotive field.

 

GNEE STEEL company focuses on providing more professional automotive steel raw materials and customized steel services. Contact us to learn more!