DC01 ( 1.0330 )
| Grade : | DC01 | ||||
| Number: | 1.0330 | ||||
| Classification: | Non-alloy quality steel | ||||
| Standard: |
|
||||
| Equivalent grades: | Go here |
Chemical composition % of steel DC01 (1.0330): EN 10130-2006
| Unless otherwise agreed at the time of enquery and order, this grade may be supplied as alloy steel (for example with boron or titanium) |
| C | Mn | P | S |
| max 0.12 | max 0.6 | max 0.045 | max 0.045 |
Mechanical properties of steel DC01 (1.0330)
| Rm - Tensile strength (MPa) | 270-410 |
| ReH - Minimum yield strength (MPa) | 280 |
| A - Min. elongation Lo = 80 mm (%) | 28 |
| A - Min. elongation Lo = 5,65 √ So (%) (+A) | 32 |
| Vickers hardness ( HV): (+A) | 105 |
Equivalent grades of steel DC01 (1.0330)
Warning! Only for reference
| EU EN |
USA - |
Germany DIN,WNr |
Japan JIS |
France AFNOR |
England BS |
European old EN |
Italy UNI |
Spain UNE |
China GB |
Sweden SS |
Czechia CSN |
Austria ONORM |
Russia GOST |
Inter ISO |
India IS |
|||||||||||||||||||||||
| DC01 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
