Gnee Steel (tianjin) Co., Ltd
+8615824687445

DC03 St13 Cold-rolled Low Carbon Steel

Dec 16, 2025

What Is DC03 Cold Rolled Steel?

 

DC03 cold rolled steel is a low-carbon steel designed for improved formability compared to commercial-quality grades. It offers better elongation and more stable deformation behavior, making it suitable for bending, stamping, and moderate drawing applications.

 

According to application, DC03(St13) cold-rolled low carbon steel is used for drawing quality. With excellent drawing and welding performance and relatively high dimensional accuracy, DC03(St13) cold-rolled low carbon steel has been widely applied to manufacture of various automotive parts.

 

Cold Rolled Steel

info-590-512

 

DC03(St13) cold-rolled low carbon steel chemical composition:


Steel grade

Chemical composition %

C

Mn

p

S

Alta

Ti b

DC03(St13)

≤0.08

≤0.45

≤0.030

≤0.025

≥0.020

-

a: For steel grades DC03 when C≤0.01, Alt≥0.015.
b: with Nb instead of Ti, but Nb and TI total content ≤0.20

 

DC03(St13) cold-rolled low carbon steel mechanical performances:


Steel grade

Yield
Strength a
MPa

Tensile
Strength
Mpa
≥

After Breakage Percent Elongation
(L o =80mm, b=20mm) % ≥

r b,c
≥

n b, c
≥

Nominal Thickness mm

<0.70

0.70~<1.0

1.0~<1.6

≥1.6

DC03(St13)

120~240

270

32

34

35

36

-

-

a. taking R P0.2 in case of indistinct yield, otherwise R eL .
c. r=(r 90 +2r 45 +r 0 )/4; n=(n 90 +2n 45 +n 0 )/4.

 

DC03(St13) cold-rolled low carbon steel surface quality:


Grade

Code No.

Features

Relatively high-grade finishing surface

FB(O3)

It is allowed for the existence of a few surface defects which will not affect forming and coating & plating adhesiveness such as minor scratch, impression, pit, roll mark and oxidation tint.

High-grade finishing surface

FC(O4)

One side of relatively good quality is free from any remarkable defect visible and the other side must reach FB requirements at least.

Ultra high-grade finishing surface

FD(O5)

One side of relatively good quality is free from any defect, namely appearance quality after painting or electrogalvanizing is no affected, and the other side must reach FB requirements at least.

 

DC03(St13) cold-rolled low carbon steel reference list of equivalent steel grades:


Standard No.

Q/BQB 403-2003

BZJ 492-2004

EN 10130-1999

EN 10130-1999

D2N 1623-(1)-1983

GB/T 5213-2001

Q/BQB 403-1999 BZJ407-1999

Steel grade

DC03(St13)

DC03(St13)

DC03

FeP03

RRSt13

-

St13

As for tensile strain mark, DC03(St13) cold-rolled low carbon steel is guaranteed that no tensile strain mark occurs on steel plates and strips at their application within 6 months after they are produced and in case of room temperature storage.

Contact now