Gnee Steel (tianjin) Co., Ltd
+8615824687445

Dx51d Z60 Z80 Z100 Z120 Z275 Zinc Coated Steel Gi Galvanized Steel Coil with Zero Spangle

Nov 21, 2025

Hot-dip galvanized steel DX51D

 

The hot-dip galvanized steel DX51D in accordance with the 10346 standard is an essential material in modern metal processing. This high-quality steel, which is listed under the material number 1.0917 (formerly 1.0226), is characterized by its excellent cold forming properties and is one of the soft steels that have been specially developed for demanding forming processes. The classification as machine-seam quality also underlines its particular suitability for automated production processes, where precision and consistent quality are of central importance.

 

The requirements set out in the 10346 standard ensure that the steel not only offers high mechanical properties, but also has excellent corrosion resistance. This is achieved by hot-dip galvanizing, in which a protective zinc coating is applied to the surface of the steel. The galvanizing process significantly extends the service life of the material, as it is protected from environmental influences such as moisture and aggressive chemical substances. Various coatings are available, including +Z, +ZF, +ZA, +ZM, +AZ and +AS. Each of these coatings has specific properties that allow the steel to be precisely matched to the respective requirements and conditions of use.

Hot-dip galvanized steel DX51D

DX51D steel has proven to be a versatile and reliable material, particularly in industry. Its good formability makes it ideal for cold forming processes, such as those used in mechanical engineering, the automotive industry and the construction sector. The excellent combination of mechanical stability and flexible formability makes it possible to produce complex components with tight tolerances. At the same time, the machine-seam quality means that the steel can be processed efficiently in automated production processes, resulting in a high level of cost-effectiveness in production.

  • Galvanized Steel Specifications Table

 

Quality Standard Material No. Available coatings
DX51D DIN EN 10346 1.0917 +Z, +ZF, +ZA, +ZM, +AZ, +AS

 

  • Quality
Testing direction Yield Point Re
(MPa)
Tensil Strength
Rm (MPa)
Elongation
A80 (in %)
Q – 270 – 550 ≥ 22

 

  • Mechanical Properties
C
%
Si
%
Mn
%
P
%
S
%
Ti
%
≤ 0,18 ≤ 0,50 ≤ 1,20 ≤ 0,12 ≤ 0,045 ≤ 0,30

 

Hot-dip galvanized steel DX51D