ELECTRO GALVANIZED
Electro-galvanized products are rolled by a cold tandem rolling unit and then annealed by a CAPL unit before entering the electro-galvanizing unit. After surface cleaning, zinc is continuously deposited from the zinc salt aqueous solution onto the surface of the prepared steel strip under the action of the electric field. The process of applying a galvanized layer on the surface obtained. Continuous electro-galvanized cold-rolled steel sheets and strips are suitable for automotive, electronics, home appliances and other industries. The delivery method is mainly steel coil delivery, and the required steel plates and steel strips can also be obtained by cross-cutting or longitudinal cutting.

Electro Galvanized – sheet steel in coil and cut lengths that is zinc coated by electro-deposition for a light or thin coated mass. This product is manufactured for use as formed or miscellaneous parts where corrosion resistance is necessary as opposed to an uncoated sheet.
Electro Galvanized is not intended to withstand outdoor exposure without chemical treatment or painting.

The electro-galvanized sheet is produced as commercial quality, drawing quality, drawing quality special killed, and structural or physical quality and is readily available in three zinc coating class weights of A, B, or C. Electro-Galvanized ASTM A-879 This specification covers the requirements for zinc coatings applied by the electrolytic process to any grade of hot-rolled or cold-rolled steel sheets for applications requiring designation of the coating mass on each surface.

Coating application shall be done on one or both surfaces with equal or differential coating masses and similar levels of corrosion protection, and shall have no effect on the base metal mechanical properties. The coated sheets may be available as commercial steel (CS), drawing steel (DS), deep drawing steel (DDS), extra-deep drawing steel (EDDS), structural steel (SS), high-strength low-alloy steel (HSLAS), high-strength low-alloy steel with improved formability (HSLAS-F), solution-hardened steel (SHS), or bake-hardenable steel (BHS). Coatings shall be designated accordingly, and shall undergo test methods such as weigh-strip-weigh method, nondestructive X-ray fluorescence measurement, and Coulometric method.





