Gnee Steel (tianjin) Co., Ltd
+8615824687445

Galvanized steel coil in accordance with ISO standard DX51D+Z S350GD+Z

Oct 27, 2025

Galvanized steel coil in accordance with ISO standard

 

ISO standards play an important role in galvanized steel. For example, ISO 1461 is the main international standard for galvanized coating, which specifies the minimum thickness and quality requirements of the galvanized coating.

In addition, ISO 65 is a commonly used international standard for galvanized steel pipes, which specifies the size, quality and technical requirements of galvanized steel pipes. These standards ensure that the quality and performance of galvanized steel meet international standards.

 

Specifications Range Tolerance Standard
Thickness 0.12-6.0mm ISO 9444
Width 600-2000mm ISO 16162

 

1. Triple protective coating technology

 

Using continuous hot-dip coating process (CGL), the zinc layer thickness of 30-275g/m² can be customized to meet the needs of different corrosive environments:

 

Outer layer: pure zinc protective layer (resistant to mechanical damage)

 

Middle layer: zinc-iron alloy layer (chemical stability)

 

Base layer: high-strength steel substrate (bearing core)

Galvanized steel coil in accordance with ISO standard

2. Intelligent surface treatment system

Surface finish: Ra≤0.8μm (in compliance with ISO 8503-2 standard)

Three appearances are available: no zinc spangles, small zinc spangles, and regular zinc spangles

Special chromate passivation treatment (in compliance with RoHS directive)

  • Thickness grading control

Differentiate the coating standards based on material thickness:
 

Thickness Average thickness of coating
≥6mm >85μm, local ≥70μm.
3-6mm >70μm, local ≥55μm.
1.5-3mm >55μm, locally ≥45μm.

 

  • Testing and certification

Galvanized steel coil needs to pass salt spray tests, bending tests, etc. to verify the coating quality.

 

Hot dip galvanized steel coil needs to follow internationally recognized standards such as DIN EN ISO 1461 to enhance the global competitiveness of products.

 

GNEE STEEL are mainly engaged in steel export trade of the following steel products:HRC/HRS,CRC/CRS,GI,GL,PPGI,PPGL,ROOFING SHEETS,TINPLATE,TFS,STEEL PIPES/TUBES,WIRE RODS,REBAR,ROUND BAR,BEAM AND CHANNEL,FLAT BAR ETC. Our Products are widely used in: hardware, machinery, electrical appliances, vehicle parts, construction and other industries.

 

We mainly export to South America (35%), Africa (25%), the Middle East (20%), Southeast Asia (20%). Good corporate reputation, won the trust of our customers. In these areas we have established stable and long-lasting relationships with many customers based on our honesty, high quality product, reasonable price, and sincere service.

Galvanized steel coil in accordance with ISO standard