Gnee Steel (tianjin) Co., Ltd
+8615824687445

Knowledge points for industrial aluminum profile processing and installation

Apr 18, 2023

There are many types of industrial aluminum profiles, and there is a great demand in various industries, which is why many people come to GNEE Aluminum for customization. Have you all understood the processing and installation methods of this product?

Introduction to the processing methods of industrial aluminum profiles

1. Extrusion method

Make an aluminum profile mold based on the cross-section of the profile, and use an extruder to extrude the round cast rod heated to the critical point from the mold.

2. Rolling method

This method is only used when large quantities of medium and small sized bars and profiles with simple cross-sectional shapes are required and do not have high requirements for size and surface quality.

3. Surface treatment

The surface processing method for industrial aluminum profiles is generally surface anodizing, and some require treatment methods such as spraying and electrophoresis.

Steps for installing industrial aluminum profiles

1. Sawing

Select high-quality specialized aluminum profile sawing machines, and match them with high-precision hard alloy aluminum profile special discs with more than 100 teeth.

2. Drilling

Before installation and connection, installation process holes must be drilled at designated locations based on the different dimensions of the aluminum profile.

This concludes the introduction of several processing methods and installation steps proposed for industrial aluminum profiles. We hope that all friends can obtain valuable information from them.

3. Tapping tooth

When installing support feet, casters, etc. at the bottom of the aluminum profile, it is necessary to tap the thread at the center hole of its end face, and the thread size should match the screw pattern size of the shoe feet and casters.