Gnee Steel (tianjin) Co., Ltd
+8615824687445

Practical application of zinc-aluminum-magnesium steel plate

Dec 12, 2023

Practical application of zinc-aluminum-magnesium steel plate


Title: Zinc aluminum magnesium alloy material

For consumer products, commonly used alloy materials include aluminum alloys, zinc alloys and magnesium alloys. Titanium alloys are commonly used in the medical field due to their good biocompatibility. Physical properties comparison table of these four alloys, titanium alloy is the hardest and has the lowest strength. In terms of hardness, titanium alloy is much harder than the other three alloys. In terms of tensile strength, titanium alloy is stronger than zinc alloy, followed by magnesium alloy, and aluminum alloy is the strongest. Strength and Hardness Comparison But for product structure design, weight also needs to be considered. If the specific gravity is taken into consideration, the specific strength of zinc alloy is the smallest due to its density. Titanium alloys and magnesium alloys have high specific strength, but titanium alloys are expensive and have poor processability. Therefore, magnesium alloys are mostly used in structural parts that require a comprehensive consideration of weight and strength.

Therefore, aluminum-magnesium alloy has become the shell material of portable notebook computers. At present, most manufacturers of notebook computer products use aluminum-magnesium alloy shell technology.

Zinc aluminum magnesium

Definition: Zinc, aluminum, and magnesium is an alloy metal that is mainly used for surface anti-corrosion treatment of steel and steel products, including various zinc series coatings and a large number of entire steel parts by dip plating for anti-corrosion;

 

Zinc aluminum magnesium steel plate customization

GNEE STEEL zinc-aluminum-magnesium plate manufacturers accept customization, and have gathered many zinc-aluminum-magnesium plate manufacturers, suppliers, buyers, and manufacturers.

Zinc aluminum magnesium steel plate

Galvanized aluminum magnesium is a new type of coating product with high corrosion resistance. The coating composition is mainly zinc, and the content of added aluminum and magnesium is between 5% and 8% (the overall magnesium content is not less than 0.2%). The added magnesium (Mg) component is conducive to promoting a very stable and stable state. The well-organized and delicate protective film - hydrozincite (Zn5(OH)8Cl2?H2O) generates and maintains a film-like covering layer on the surface of the coating, thereby ensuring excellent corrosion resistance. Compared with traditional galvanized or galvanized products, galvanized aluminum-magnesium has better notch corrosion resistance, flat corrosion resistance, low friction coefficient and wear resistance. It can be used as the substrate of color-coated boards and is widely used It is used in automobile parts, air conditioners, solar photovoltaic brackets, animal husbandry, high-speed guardrails, electrical cabinets and roof and wall materials of steel structure buildings, etc.

Zinc aluminum magnesium steel sheet