Solar Mounting System FAQ
Based on S350GD ZM275 Galvanized Aluminum Magnesium Channel Steel
1. What is S350GD ZM275 channel steel used for in solar mounting systems?
S350GD ZM275 channel steel is mainly used as a structural component for photovoltaic mounting systems, including rails, beams, columns, and supporting frames. It provides sufficient strength to support solar panels while offering long-term corrosion protection for outdoor environments.
2. What does S350GD mean in steel grade?
S350GD refers to a structural steel grade with a minimum yield strength of 350 MPa. It is designed for load-bearing applications that require both strength and formability, making it suitable for solar mounting structures exposed to wind, snow, and mechanical loads.

3. What is ZM275 galvanized aluminum magnesium coating?
ZM275 is a zinc-aluminum-magnesium alloy coating with a total coating weight of 275 g/m² on both sides. This coating provides enhanced corrosion resistance compared to traditional hot-dip galvanized steel, especially in harsh outdoor environments.
4. Why is ZM coating better than traditional galvanized coating for solar projects?
ZM coating offers several advantages:
Higher corrosion resistance
Better cut-edge protection
Self-healing performance
Longer service life
These features make ZM275-coated steel more suitable for photovoltaic systems designed for 25 years or more of outdoor use.
5. Is S350GD ZM275 suitable for coastal or high-humidity environments?
Yes. Thanks to the aluminum and magnesium elements in the ZM coating, S350GD ZM275 channel steel performs well in coastal, high-humidity, and industrial environments, where conventional galvanized steel may corrode faster.
6. What are the typical shapes of channel steel used in solar mounting systems?
The most common shapes include:
C-channel steel
U-channel steel
Hat-shaped profiles
These profiles are optimized for strength, ease of installation, and compatibility with bolts and clamps used in photovoltaic systems.

7. Can S350GD ZM275 channel steel be customized?
Yes. Channel steel can be customized according to project requirements, including:
Width and height
Thickness
Length
Hole spacing and punching design
Customization helps improve installation efficiency and structural performance.
8. Is S350GD ZM275 easy to process and form?
S350GD steel has good cold-forming properties. Combined with ZM coating, it supports roll forming, cutting, punching, and bending while maintaining coating integrity and corrosion protection.
9. Will cutting or drilling damage the ZM coating?
While any mechanical processing may expose cut edges, ZM coating has self-healing properties. The magnesium component helps form a protective layer at cut edges, reducing the risk of corrosion.
10. What thickness range is commonly used for solar mounting channel steel?
Typical thickness ranges from 1.5 mm to 3.0 mm, depending on structural design, load requirements, and local environmental conditions. Higher load or wind areas usually require thicker sections.





