Aluminum Condenser Header Pipeconsists of an oversized pipe, which ensures speed and pressure are so small as to have a negligent effect on the inlet resistance in the individual circuits. The fluorine in the air conditioner is compressed by the compressor to produce high-temperature and high-pressure liquefied gas, which is condensed by the condenser and then becomes a low-temperature and high-pressure liquid, and enters the collector tube.
Details of Aluminum Condenser Header Pipe
Cladding type: Single side cladding material, double sides cladding material.
Cladding layers: 4045, 4343, 4043, 7072, and other anti-corrosion layers, can be added with zinc as needed.
Material temper: M, H14, H16, H18, or according to customer requirements.
Cladding rate: 10±2 or according to customer requirements.
Core layer: 3003, 3305, 6063, etc.
Outer diameter: 9-61mm.
Wall thickness: 1-3.0mm.
Processing: High-frequency welding.
Types of Aluminum Condenser Header Pipe
Cladding Aluminum Condenser Header Pipe
Punched Aluminum Condenser Header Pipe
Specifications of Aluminum Condenser Header Pipe
Round Aluminum Condenser Header Pipe
| Size | Code | Drawing No. | Dimensions | ||
| T Width | Thickness | Material Thickness | |||
| P20x1.15 | P01-20×1.15A | P20x1.15-01A | 20±0.1 | 17.7±0.1 | 1.15 |
| P20x1.2 | P01-20×1.2B | P20x1.2-01B | 20±0.1 | 17.6±0.1 | 1.2 |
| P20x1.5 | P01-20×1.5C | P20x1.5-01C | 20±0.1 | 17±0.1 | 1.5 |
| P20x1.12 | P01-20×1.12D | P20x1.12-01D | 20±0.1 | 17.76±0.1 | 1.12 |
| P20x1.0 | P01-20×1.0E | P20x1.0-01E | 20±0.05 | 18±0.05 | 1.0 |
| P20x2.05 | P01-20×2.05F | P20x2.05-01F | 20±0.05 | 16±0.05 | 2.05 |
| P28x1.6 | P02-28×1.6A | P28x1.6-02A | 28±0.12 | 24.8±0.12 | 1.6 |
| P28x1.5 | P02-28×1.5C | P28x1.5-02C | 28±0.1 | 25±0.1 | 1.0 |
| P33.4×1.5 | P03-33.4×1.5A | P33.4×1.5-03A | 33.40-0.2 | 30.40-0.2 | 1.5 |
| P30x1.2 | P04-30×1.2A | P30x1.2-04A | 30+0.20 | 27.6+0.20 | 1.2 |
| P30x1.5 | P04-30×1.5B | P30x1.5-04B | 30±0.05 | 27±0.05 | 1.5 |
| P30x1.6 | P04-30×1.6C | P30x1.6-04C | 30±0.12 | 26.8±0.1 | 1.6 |
| P19x1.3 | P05-19×1.3A | P19x1.3-05A | 19±0.05 | 16.4±0.05 | 1.3 |
| P19x1.2 | P05-19×1.2B | P19x1.2-05B | 19±0.05 | 16.6±0.05 | 1.2 |
| P15.88×1 | P06-15.88x1A | P15.88×1-06 | 15.88±0.05 | 13.88±0.05 | 1 |
| P31.6×1.5 | P07-31.6×1.5A | P31.6×1.5-07 | 31.6±0.2 | 28.60-0.1 | 1.5 |
| P25x1.8 | P08-25×1.8B | P25x1.8-08B | 25±0.1 | 21.4±0.1 | 1.8 |
| P25x1.5 | P08-25×1.5C | P25x1.5-08C | 25±0.1 | 22±0.1 | 1.5 |
| P38x2 | P09-38x2A | P38x2-09A | 38±0.15 | 34±0.1 | 2 |
| P38x2.2 | P09-38×2.2B | P38x2.2-09B | 38±0.15 | 33.6±0.1 | 2.2 |
| P22x1.3 | P10-22×1.3A | P22x1.3-10A | 22±0.075 | 19.4±0.075 | 1.3 |
| P22x1.27 | P10-22×1.27B | P22x1.27-10B | 22±0.05 | 19.46±0.05 | 1.27 |
| P26x1.9 | P11-26×1.9A | P26x1.9-11A | 26±0.15 | 22.2±0.15 | 1.9 |
| P23x1.7 | P12-23×1.7A | P23x1.7-12A | 23±0.1 | 19.6±0.1 | 1.7 |
| P22.28×0.6 | P13-22.28×0.6A | P22.28×0.6-13A | 22.28±0.1 | 21.08±0.1 | 0.6 |
| P17.5×1.2 | P14-17.5×1.2A | P17.5×1.2-14A | 17.5±0.1 | 15.1±0.1 | 1.2 |
| P23.2×1.3 | P15-23.2×1.3A | P23.2×1.3-15A | 23.2-23.3 | 20.6-20.7 | 1.3 |
| P27x1.3 | P16-27×1.3A | P27x1.3-16A | 27±0.05 | 24.4±0.05 | 1.3 |
| P16x1 | P17-16x1A | P16x1-17A | 16±0.05 | 14±0.05 | 1 |
| P16x1.2 | P17-16×1.2B | P16x1.2-17B | 16±0.05 | 13.6±0.05 | 1 |
| P15.88×0.6 | P06-15.88×0.6B | P15.88×0.6-06B | 15.88±0.1 | 14.68±0.1 | 0.6 |
| P20.15×1.15 | P18-20.15×1.15A | P20.15×1.15-18A | 20.15±0.05 | 17.85±0.05 | 1.15 |
| P21x2 | P19-21x2A | P21x2-19A | 21±0.05 | 17±0.05 | 2 |
| P20.1×1.25 | P20-20.1×1.25A | P20.1×1.25-20A | 20.1±0.05 | 17.6±0.05 | 1.25 |
| P32x2.5 | P21-32×2.5A | P32x2.5-21A | 32±0.15 | 27±0.15 | 2.5 |
| P32x2.3 | P21-32×2.3C | P32x2.3-21C | 32±0.15 | 27.4±0.15 | 2.3 |
| P32x1.8 | P21-32×1.8B | P32x1.8-21B | 32±0.1 | 28.4±0.1 | 1.8 |
| P30.26×1.55 | P22-30.26×1.55A | P30.26×1.55-22A | 30.26±0.05 | 27.14-27.2 | 1.55 |
| P39.4×2.7 | P23-39.4×2.7A | P39.4×2.7-23A | 39.4±0.15 | 34±0.1 | 2.7 |
| P12x1 | P24-12×1 | P12x1-24A | 12±0.05 | 10±0.05 | 1.0 |
| P33.3×1.5 | P25-33.3×1.5A | P33.3×1.5-25A | 33.3±0.1 | 30.3±0.1 | 1.5 |
| P22.22×1.6 | P26-22.22×1.6A | P22.22×1.6-26A | 22.22±0.05 | 19.02±0.05 | 1.6 |
D-type Aluminum Condenser Header Pipes (Including D and Square Types)
| Size | Code | Drawing No. | Dimensions | ||
| T Width | Thickness | Material Thickness | |||
| PD20.4×18 | PD01-20.4×18 | PD20.4×18-01 | 20.4±0.1 | 18±0.1 | 1.2 |
| PD20x18 | PD02-20×18 | PD20x18-02 | 20±0.1 | 18±0.1 | 1 |
| PD20.4×18.5 | PD03-20.4×18.5 | PD20.4×18.5-03 | 20.4±0.05 | 18.5±0.05 | 1 |
| PD25.5×19 | PD04-25.5×19 | PD25.5×19-04 | 25.5±0.1 | 19±0.05 | 1.2 |
| PD15.1×12.7 | PD05-15.1×12.7 | PD15.1×12.7-05 | 15.1±0.05 | 12.7±0.05 | 1.2 |
