The automobile body is one of the important components of the automobile. There are many types of steels involved in automobile body manufacturing, and different elements play different roles in these steels. In this article, GNEE STEEL will further focus on the commonly used bake-hardened steel (BH), High-strength low-alloy steel (HSLA) and high-strength steel without interstitial atoms (HSIF) steels and the elements they contain are introduced:
High strength steel bake hardened steel plate
High-strength steel bake-hardened steel plate is a bake-hardened cold-rolled steel plate made from low carbon steel or ultra-low carbon steel by adding micro-alloying elements niobium, titanium or vanadium. It also has excellent deep drawing performance and baking High quality automotive sheet with hardening properties.

BH steel hardening principle
The strengthening of BH steel plates is achieved through solid solution strengthening. Due to the presence of solid solution carbon or nitrogen in the steel, dislocation occurs during stamping and forming. During the painting and baking process at about 170°C, the solid solution carbon interacts with the dislocation, causing the strength of the steel plate to increase, resulting in the effect of artificial strain age hardening. . The principle is the same as the deterioration phenomenon that occurred in low carbon steel in the past.
The BH steel plate is characterized by being soft and easy to form and process before stamping. The yield strength is increased through the painting and baking process after stamping, so it is very suitable for covering parts such as automobile exterior panels.
HSLA
Low-alloy high-strength steel is strengthened by adding micro-alloying elements such as niobium, titanium, and vanadium singly or in combination to form carbonitride particles and precipitate them. At the same time, higher strength is obtained through the refinement of grains by micro-alloying elements, and this steel type has good welding properties.

Interstitial-free high-strength steel
Interstitial-free high-strength steel improves the plastic strain ratio (r value) and strain hardening index (n value) of the steel by controlling the chemical composition of the steel. Usually, phosphorus element, ultra-low carbon and micro-alloy are added to low carbon steel and ultra-low carbon steel to greatly improve the deep drawability, plasticity and toughness of phosphorus-containing high-strength IF steel, and the solid solution strengthening of phosphorus element The high strength of IF steel is guaranteed. Due to the solid solution strengthening of the elements in the steel and the interstitial-free microstructure, this steel has high strength and very good cold forming properties, and is often used to make complex parts that require deep drawing.
In addition, low carbon steel with good deep drawing performance is commonly used in the thin plate parts of automobile bodies. This kind of steel has high strength and ductility and is suitable for manufacturing parts such as car doors and hoods.





