Data Table - Cold Rolled Steel DC06
What is Cold Rolled Steel DC06?
DC06 is an ultra-low carbon steel characterized by outstanding cold formability. The chemical composition of DC06 is precisely defined to ensure that the material has the required mechanical properties. Typically, DC06 contains a maximum of 0.01% carbon, a maximum of 0.20% manganese and only minimal traces of phosphorus and sulphur. This small amount of alloying elements contributes to the steel's exceptional formability and weldability.

| Category | Specification / Value |
|---|---|
| Standard | EN 10130 / EN 10152 (for electrolytic galvanized version) |
| Steel Grade | DC06 - Special Extra Deep Drawing Quality (SEDDQ) |
| Material No. | 1.0873 |
| Type | Cold Rolled Low Carbon Steel |
| Key Feature | Ultra-low carbon steel with superior deep drawing performance |
Chemical Composition (Typical Maximum %)
| C | Mn | P | S |
|---|---|---|---|
| ≤ 0.01% | ≤ 0.20% | minimal trace | minimal trace |
Mechanical Properties
| Parameter | Value |
|---|---|
| Yield Strength (Re) | ≤ 120 MPa |
| Tensile Strength (Rm) | 270 – 350 MPa |
| Elongation A80 | ≥ 40% |
| r-value (r90) | high - suitable for extreme deep drawing |
| n-value (n90) | high - excellent strain hardening performance |
Dimensions & Delivery Forms
| Item | Specification |
|---|---|
| Thickness range | 0.35 mm – 3.0 mm |
| Width | up to 1,800 mm (depending on mill capability) |
| Delivery forms | Coil, slit coil, sheet, cut-to-length sheet |
Surface Quality & Finish
| Item | Option |
|---|---|
| Surface Class | A (standard) / B (high uniformity for coatings) |
| Surface Finish | b (bright), g (semi-bright), m (normal), r (rough) |
Processing Performance
| Process Compatibility | Result |
|---|---|
| Deep drawing | ★★★★★ |
| Bending & stamping | ★★★★★ |
| Weldability | ★★★★☆ (excellent due to ultra-low carbon) |
| Paintability & plating | ★★★★★ |
Typical Applications
| Industry | Example Components |
|---|---|
| Automotive | Fuel tanks, door inner panels, body structural precision parts |
| Home Appliances | Outer panels, inner shells, compressor housings |
| Industrial Fabrication | Precision-formed housings, covers, and stamping parts |
FAQs
Q: How does cold-rolling affect magnetic properties?
A: Cold rolling slightly increases yield and strength and can increase magnetic permeability anisotropy; specify magnetic requirements if relevant for electrical parts.
Q: Is DC01 suitable for powder coating?
A: Yes; surface prep and degreasing are critical. Choose surface class and oiling consistent with coating line specifications.
Q: How to compare prices from Chinese mills vs EU mills?
A: Compare ex-works and FOB plus inland logistics, certificates, and lead time. Chinese domestic spot is often lower, but landed cost parity depends on shipping, duties and quality assurance.
Q: What paperwork should I insist on?
A: EN 10204 3.1 MTC, packing list, COA, mill inspection report and any special test certificates (e.g., r-value test) for critical parts.





