DC01 Cold-Rolled Steel
What Is DC01 Cold-Rolled Steel?
DC01 is a low-carbon, cold-rolled steel grade specified for forming, bending, stamping, and general fabrication. It belongs to a family of cold-rolled sheet grades with controlled chemical composition and mechanical properties to ensure predictable forming behavior and high-quality surface finish.
Key characteristics of DC01 include:
- Consistent low carbon content for improved ductility
- Smooth surface suitable for painting, coating, and decorative finishes
- Tight thickness and dimensional tolerances
- Good uniformity across the steel sheet
- Suitable for bending, profiling, and moderate drawing operations
The cold-reduction process improves tensile strength and surface precision, making DC01 suitable for applications that require both strength and aesthetic quality.
Cold-Rolled Steel

DC01 Steel Physical Properties
DC01 has stable and predictable physical properties.
| Density | ρ / g·cm⁻³ | 7.85 | Provides structural mass and rigidity, consistent with standard carbon steels |
| Melting Point | °C | ~1,460 | Typical melting temperature for mild steel grades |
| Thermal Conductivity | W/m·K | 54 | Ensures good heat dissipation, useful for applications exposed to temperature changes |
| Specific Heat Capacity | J/kg·K | 486 | Indicates the energy needed to raise temperature; moderate heat absorption rate |
| Electrical Resistivity | µΩ·m | 0.12 | Moderate conductivity, suitable for general fabrication processes |
| Thermal Expansion Coefficient | µm/m·°C | 11.7 | Reflects predictable expansion under heat, allowing dimensional accuracy in coatings and welding |
| Magnetic Properties | - | Ferromagnetic | Easily magnetized; important for electrical and mechanical assemblies |
DC01 Grade Equivalent Chart
The following table compares DC01 steel equivalents across major international standards. While the grades are not always chemically identical, they offer comparable mechanical performance and application suitability.
DC01 Steel Equivalent Grades Table
| Standard System | Equivalent Grade | Description |
|---|---|---|
| EN 10130 | DC01 | Cold rolled mild steel for general forming |
| DIN | St 12 | Cold forming steel with similar strength and ductility |
| ASTM | A1008 CS Type B | Commercial-quality cold rolled steel |
| JIS | SPCC | Cold rolled commercial steel |
| GB (China) | Q195 / SPCC | Low-carbon cold rolled steel |
| ISO | CR1 | Cold rolled steel for general applications |
This DC01 equivalent chart helps buyers confidently substitute materials when sourcing cold rolled steel from different regions.
Chemical Composition Comparison
Although equivalent grades share similar performance, their chemical limits may vary slightly between standards.
Typical Chemical Composition of DC01
| Element | Max Content (%) |
|---|---|
| Carbon (C) | ≤ 0.12 |
| Manganese (Mn) | ≤ 0.60 |
| Phosphorus (P) | ≤ 0.045 |
| Sulfur (S) | ≤ 0.045 |
| Nitrogen (N) | ≤ 0.009 |
The low carbon content contributes to excellent formability and surface quality, which are key characteristics of DC01 and its equivalent grades.
GNEE STEEL provides a comprehensive range of precision cold-rolled steel grades beyond DC01, suitable for forming, deep drawing, and advanced applications:
DC03 – improved formability for moderate drawing
DC04 – deeper drawing capability
DC05 – high drawing-quality steel
DC06 – extra-deep drawing applications
Customized width and coil-to-sheet cutting services
Customers requiring sheets, coils, slitted strips, or specific packaging solutions can request customized quotations and technical support.

FAQ:
1. Is cold rolled steel easy to weld?
Yes, low-carbon cold rolled steel has good weldability and is suitable for most conventional welding methods.
2. How is cold rolled steel packaged for export?
Cold rolled steel is usually packed in seaworthy export packaging, including steel strips, moisture-proof paper, and pallets or steel skids to ensure safe international transportation.
3. What industries commonly use cold rolled steel?
Cold rolled steel is widely used in automotive parts, home appliances, construction components, metal furniture, electrical enclosures, and general manufacturing.
4. Can cold rolled steel be cut and processed easily?
Yes, cold rolled steel has excellent machinability and is suitable for cutting, bending, punching, and stamping processes.
5. What width and length options are available?
Standard widths are usually 1000 mm, 1250 mm, and 1500 mm, with coils or cut-to-length sheets available based on customer requirements.





