DC05 Mild Metal Steel Cold Rolled Carbon Steel Sheet

The special deep-drawing grade DC05 is specified in accordance with the DIN EN 10130 standard, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard specifies the technical requirements and test methods for cold-rolled products used in numerous industrial applications, particularly where exceptional formability and excellent surface quality are required.

DC05 is a low-carbon steel that is characterized by its excellent cold formability. The chemical composition of DC05 is strictly controlled to ensure that the material has the desired mechanical properties. The carbon content in DC05 is typically a maximum of 0.02 %, while the manganese content is a maximum of 0.25 %. This composition promotes the high formability and weldability of the steel.

The mechanical properties of DC05 are characterized by a low yield strength of maximum 150 MPa and a tensile strength between 270 and 350 MPa. An outstanding feature of DC05 is its high elongation at break of at least 38 %, which illustrates its excellent formability. These properties make DC05 ideal for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or sophisticated components in the electrical industry.

Specifications Table：

DC01 – This grade can be used for simple forming work, e.g. bending, embossing, beading and drawing.
DC03 – This grade is suitable for forming requirements such as deep drawing and difficult profiling.
DC04 – This grade is suitable for high forming requirements.
DC05 – This deep-drawing grade is suitable for higher forming requirements.
DC06 – This special deep-drawing grade is suitable for the highest forming requirements.
DC07 – This super deep-drawing grade is suitable for extreme forming requirements.
 

GNEE STEEL also offers the following brands:DC01 DC03 DC04 DC05 DC06 DC07
SPCC SPCD SPCE SPCF ST12 ST13 ST14 ST15;or as Customer's Requirement