Hot Dip Galvalume Steel Coil Description
Hot-dip aluminum-zinc plated steel plate is also called aluminum-zinc plated plate, aluminum-zinc plated natural color plate, aluminum-zinc plated fingerprint resistant plate and aluminum-zinc plated light plate. As the surface coating of the plate is an alloy composed of aluminum, zinc and other trace elements, it has outstanding corrosion resistance and gradually replaces galvanized plate. Aluminum-zinc plated plate is mainly used for steel structure roof, wall surface, switch cabinet body and household appliance board.
The mixed structure of hot dip aluminum zinc silicon coating has its unique advantages in corrosion resistance. When the aluminum-zinc plate is used, the zinc-aluminum eutectic in the aluminum-rich phase skeleton is first corroded, which has a good protective effect on the incision as pure zinc. The corroded product is not as easy to fall off as the galvanized plate, but is just stored in the aluminum-rich phase skeleton gap, which can prevent further corrosion of the coating to a certain extent.
- Product Parameters
|
Product Name |
Hot Dip Galvalume Steel Coil |
|
Thickness |
0.12mm-6.00mm |
|
Width |
600mm-1500mm |
|
Length |
1m-12m, Support Customization |
|
Standard |
AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc. |
|
Thickness of Aluminum Zinc Coating |
30-185g/m² |
|
Content of Al-Zn Coating |
Al: 55%, Zn: 43.5%, Si: 1.5% |
- Mechanical Properties
|
Grade |
Yield Strength MPa≥ |
Tensile Strength MPa≥ |
Elongation A%≥ |
|
DX51D Z/ZM/AZ/AM |
240-380 |
270-500 |
22 |
|
DX52D Z/ZM/AZ/AM |
140-300 |
270-420 |
26 |
|
DX53D Z/ZM/AZ/AM |
140-260 |
270-380 |
30 |
|
DX54D Z/ZM/AZ/AM |
120-220 |
260-350 |
36 |
|
S220GD Z/ZM/AM |
220 |
300 |
20 |
|
S250GD Z/ZM/AZ/AM |
250 |
330 |
19 |
|
S280GD Z/ZM/AM |
280 |
360 |
18 |
|
S300GD A/AM |
300 |
380 |
18 |
|
S320GD Z/ZM/AM |
320 |
390 |
17 |
|
S350GD Z/ZM/AZ/AM |
350 |
420 |
16 |
|
S450GD A/AM |
450 |
480 |
15 |
|
S550GD Z/ZM/AZ/AM |
550 |
550 |
- Galvanized Surface Selection
|
Type of Coating |
Recommended Coating Weight |
|
Aluminum-zinc Alloy |
30/40/50/60/75/90/100/150 |
|
A: Coating quality50g/㎡,approximately equal to the coating thickness13.3pm |
|
|
Project |
Classification |
Symbol |
|
Type of Coating |
Aluminum-zinc Alloy |
AZ |
|
Surface Finish |
Conventional Sequins |
R |
|
Minimize Sequins |
M |
|
|
Skin Through |
S |
|
|
Surface Treatment |
Chromate Passivation |
c |
|
Non-chromate Passivation |
C5 |
|
|
Chromate Passivationoiling |
CO |
|
|
Chromium-free Passivationoiling |
CO5 |
|
|
Anti-fingerprint |
N |
|
|
Chromate-free/Anti-fingerprint |
N5 |
|
|
No chromate high weather resistance fingerprint |
NW |
|
|
Oil filling |
0 |
|
|
No treatment |
U |
GNEE STEEL supplied carbon steel, stainless steel, galvanized steel, aluminum, copper alloys and so on. Our experienced employee, engaged in strict quality control and careful customer service, is ready to discuss your requirements and ensure the full satisfaction of customers.
