Key Takeaways
DC03 is the EN 10130 deep-drawing grade suited to washing-machine cabinets and other appliance housings with moderate deep drawing and complex stamping.
Formability is judged by elongation and the Lankford r-value; a typical mill target is elongation about 34% and r-value about 1.3, confirmed per standard and COA.
Surface quality per EN 10130:2015 is classed FB (basic), FC (improved) and FD (best); legacy A/B/C designations still appear in older documentation.
Supply terms (MOQ, batch sizes, lead time) are confirmed at order; no fixed figures are quoted here.
1. Formability for Cabinet Design
Washing-machine cabinet designs range from simple rectangular frames to complex curved panels with recessed control areas. DC03 is a drawing-grade cold-rolled steel engineered for moderate deep drawing and complex stamping. Two metrics matter most:
- Elongation: sufficient ductility to bend and stretch without cracking - a typical mill target is about 34% (A80), to be confirmed against the EN 10130 requirement for the ordered thickness and the lot COA.
- r-value: high normal anisotropy resists thickness reduction during forming, keeping cabinet rigidity - a typical target is about 1.3, confirmed per lot.
2. Surface Quality for Finishing and Durability
Appliance factories require a defect-free surface (no scale, scratches or pits) for uniform paint and powder-coating adhesion, and durability in humid service. EN 10130:2015 defines surface quality classes:
| Class | Feature | Typical use |
|---|---|---|
| FB (basic) | Smooth; minor non-visible defects allowed | Budget cabinets, hidden surfaces |
| FC (improved) | Uniform, no visible defects, high smoothness | Mid-range cabinets |
| FD (best) | Highest smoothness, no visible defects | Premium cabinets with visible panels |
FC and FD are the most common choices for appliance cabinets. Note: earlier editions of EN 10130 used A/B/C designations; the current edition uses FB/FC/FD - state the edition in your order.
GNEE STEEL primarily supplies FC and FD grade DC03 cold rolled steel sheet, the most popular choices for home appliance factories, as they balance quality and cold rolled coil price perfectly. These grades ensure excellent adhesion for powder coating and electrostatic painting, extending the service life of washing machine cabinets in humid environments.
3. Grade Positioning: DC01 / DC03 / DC04
| Grade | Forming level | Typical use |
|---|---|---|
| DC01 | General | Simple bending and panels |
| DC03 | Deep drawing (medium) | Cabinet shells with drawn features |
| DC04 | Extra deep drawing | Very complex drawn parts (often over-specified for standard cabinets) |
Selecting DC04 where DC03 suffices adds cost without benefit; select the grade by the actual forming severity of the part.
4. Supply Stability and Cost Control
For mass production, evaluate: consistent chemistry and mechanicals from coil to coil (verified by COA), surface quality control at the mill, stable lead times, and total landed cost (coil price, sea freight, insurance, duty). Minimum order quantities and batch flexibility are commercial terms - confirm them with the supplier for your specification and destination.

Packaging and Shipping

Frequently Asked Questions
Q1. What is the minimum elongation for DC03?
The EN 10130 requirement is confirmed per thickness and edition; a typical mill control target is about 34% (A80). The COA reports the delivered value.
Q2. What does surface grade FD mean?
FD is the best surface quality class per EN 10130:2015, with high smoothness and no visible defects, used for visible appliance panels.
Q3. When should I choose DC04 instead of DC03?
Only when the part demands extra deep drawing beyond DC03's capability; otherwise DC03 is the cost-effective choice.





