What Are The S320GD Galvanized Steel Coil Specifications?

S320GD Galvanized Steel Coil

S320GD steel chemical composition is tailor-made for high durability and corrosion resistance, and is thus great for structural applications. It usually has low carbon, manganese, phosphorus, and sulfur levels to strike a balance between strength and workability. S320GD has improved galvanization properties from the zinc coating, granting higher protection against environmental wear and corrosion when compared with other steel grades like S235 or S355. This particular patch of qualities gives it a set of features that make it an apt choice in construction and in fabrication.

S320GD Galvanized Steel Coil

S320GD Galvanized Steel Coil Specifications

Specification	Metric (mm)	Imperial (inch)
Thickness	0.3 – 3.0 mm	0.012 – 0.118 in
Width	600 – 1500 mm	23.62 – 59.06 in

S320GD Galvanized Steel Strip Specifications

Specification	Metric (mm)	Imperial (inch)
Thickness	0.3 – 3.0 mm	0.012 – 0.118 in
Width	20 – 600 mm	0.79 – 23.62 in

GNEE STEEL offers S320GD steel coils and strips in various widths and thicknesses. We also supply S320GD galvanized steel with custom specifications to meet diverse industry needs.

S320GD Galvanized Steel Applications

GNEE STEEL supplies S320GD steel in coils and strips, ensuring reliable quality tailored to diverse industry needs. It combination of durability, strength, and cost efficiency.

Construction and Infrastructure: Roofing panels, wall cladding, structural frameworks, bridges, guardrails, and support beams.

Automotive Industry: Body panels, chassis components, reinforcements, crash-resistant structures.

Manufacturing and Engineering: Metal enclosures, HVAC ducts, electrical cabinets, storage systems, and machinery parts.

Agricultural Equipment: Silos, fencing, farm machinery, outdoor storage facilities.

Energy and Utilities: Power transmission towers, solar panel supports, wind turbine components, industrial pipelines, and water tanks.

Mechanical Properties

Hide/Show specific columns Edit

	Coating	Standard	Yield strength R_e¹⁾ (min MPa)	Tensile strength R_m (min MPa)	Elongation A₈₀²⁾ (min %)
S220GD	Z, ZA, ZF	EN 10346	220	300	20
S250GD	Z, ZA, ZF	EN 10346	250	300	19
S280GD	Z, ZA, ZF	EN 10346	280	360	18
S320GD	Z, ZA, ZF	EN 10346	320	390	17
S350GD	Z, ZA, ZF	EN 10346	350	420	16

¹⁾ If no pronounced yield point is present, the 0.2 % yield point value R_p0,2 is used. If the yield point is pronounced, the values apply to the upper yield point R_eH.

²⁾ Decreased minimum elongation A₈₀ values apply to thicknesses 0.50mm < t ≤ 0.70mm (minus 2 units) and t ≤ 0.50mm (minus 4 units).

Material Testing

Testing direction of metal coated structural steels is longitudinal to the rolling direction.

Each metal coated mother coil is regarded as one test unit. Mechanical properties (EN-ISO 6892-1) and coating mass (EN 10346) are determined per test unit.

An inspection document of the required type according to EN 10204 is provided when agreed in the order.

Available Steel Grade

Available Steel Grade(Ensure weight and support third-party testing)
Steel grade	Coating	Yield(MPA)	Tensile(MPA)	Elongation(%)
DX51D	Z,ZF	--	270-500	20
DX52D	Z,ZF	140-300	270-420	22
DX53D	Z,ZF	140-260	270-380	26
DX54D	Z,ZF	140-220	270-350	30
S220GD	Z,ZF	220	300	18
S250GD	Z,ZF	250	330	17
S280GD	Z,ZF	280	360	16
S320GD	Z,ZF	320	390	15
S350GD	Z,ZF	350	420	14
S400GD	Z,ZF	400	470	--
S450GD	Z,ZF	450	530	--
S500GD	Z,ZF	500	560	--
Select type Galvanized Steel based on requirements

FAQ:

Is S320GD suitable for cold forming?

Yes. S320GD has good formability and is suitable for roll forming, bending, and cold shaping processes.

What thickness range is available for S320GD galvanized steel?

S320GD galvanized steel is commonly available from thin gauges (around 0.35 mm) up to structural thicknesses of 6.0 mm or more, depending on supply capability.