When we switch the color aluminum plate, there will be some problems, mainly around the crumbs, the reasons for the different crumbs are different, so the solution will be different, then we need to deal with this with certain skills One question, let’s have a brief understanding with the editor of Huaguan Board Industry.
1. Float-shaped chips: When CNC machining, machine tools or automatic line processing, color aluminum plate research and development experts point out that they expect to get this type of chips, because such chips will not wrap around the tool and workpiece. It is also convenient to organize.
2. Chipping debris: When turning brittle materials such as cast iron, brittle brass, and cast bronze, color aluminum plate research and development experts pointed out that it is very simple to form needle-shaped or fragmented chippings, which are easy to splash and hurt people, but also easy to damage. machine tool. If the chip rolling method is selected, the chips can be connected into short coils.
3. Clockwork-like chips: Turning steel parts with large cutting depth and large feed rate on a heavy lathe. The chips are wide and thick. If they form C-shaped chips, they will simply damage the cutting edge, and the base will crash and hurt people. The color aluminum plate research and development experts pointed out that the radius of the bottom arc of the chip breaker is usually increased, so that the chips will be wound and broken on the processing surface and fall by their own weight.
4. Band-shaped chips: When cutting plastic metal materials at high speed, color aluminum plate research and development experts pointed out that if chip breaking methods are not adopted, band-shaped chips are simply formed. This type of chip is constantly flowing, often entangled on the workpiece or tool, and is easily scratched. The appearance of the workpiece may damage the cutting edge of the tool, or even hurt people. Therefore, it is necessary to prevent the formation of band-shaped chips, but sometimes it is also desirable to obtain band-shaped chips so that the chips can be discharged smoothly. For example, when boring blind holes on a vertical boring machine.
These are the several problems that often occur when the color aluminum plate is switched. When dealing with this problem, you must find the correct skills and methods, and make specific analysis according to different situations. Specific operations also need specific treatment.
