3000-Coated Aluminum Coil Features
This series-coated aluminum coil is anticorrosive and its production technology is good.
The main ingredient in it is manganese element and the content is between 1.0% and 1.5%.
3000 series
Color coated aluminum coil
Thickness:0.3-3mm
Width:25-1300mm
Color coated
Characteristics Of 3 Series Color Coated Aluminum Coil
Color coated aluminum coil is the aluminum coil as the base material, after the surface paint coloring treatment to get the product, common fluorocarbon coating, polyester coating, etc. Color coated coil base material is generally used 3004 aluminum coil, 3105 aluminum coil, etc. With the performance advantages of color coated aluminum coil recognized by everyone, its application areas are becoming more and more extensive.
Color coated aluminum coil is a new type of material with good flatness, decorative, weather resistance, mechanical, and environmental protection, thus widely used in aluminum composite panels, industrial plant roofing walls, aluminum louvers, composite panels, aluminum ceilings, easy-to-pull cans, electronic products.
Color coated aluminum coil is chemically coated on the clean substrate surface after removing the antirust oil, rust spots, dust, etc. attached to the surface of the aluminum coil substrate. The product quality of color coated coil depends on the basic properties of the substrate and coating, and also on the production and operation control techniques.

Characteristics of 3 series Color coated aluminum coil
Color Coated Aluminum Coil Substrate 3004 Aluminum Coil / 3105 Aluminum Coil Performance Introduction
Color coated aluminum coil with 3004 aluminum coil: 3004 aluminum coil belongs to a series of AL-Mn alloys, with higher strength than 3003 aluminum sheet, good formability, solubility, and corrosion resistance, requiring higher strength parts than 3003 alloys.
Color coated aluminum coil with 3105 aluminum coil: 3105 aluminum coil has good rust resistance, good electrical conductivity, high plasticity in the annealed state, plasticity is still good when semi-cold work hardening, low plasticity when cold work hardening, good corrosion resistance, good weldability.









