Aluminum coil is a rolled product, produced in a coiled form of a continuous strip, and has an inner diameter and outer diameter. ID from 50 mm to 1000mm. The most common is 1050, 3003, 6061, and 5251 aluminum coil. Thickness from 0.045-80mm, width from 60-2650mm. Common widths of the aluminum coil are 800mm,1000mm, 1250mm,1450mm, and 1500mm.
| Size (mm) | Theoretical mass (kg/running m) |
| 1000 × 0.5 | 1.36 |
| 1250 × 0.5 | 1.69 |
| 1000 × 0.7 | 1.90 |
| 1250 × 0.7 | 2.37 |
| 1000 × 0.9 | 2.44 |
| 1250 × 0.9 | 3.05 |
| 1000 × 1.2 | 3.25 |
| 1250 × 1.2 | 4.04 |
Multiple industries rely on aluminum coils for a variety of applications, such as automotive, construction, heat transfer, pharmaceutical, electrical, and food industry. Compared to other materials, aluminum is a far superior material in many instances. The aluminum coil can be supplied with a standard mill finish, or it can be brushed, checkered, color coated, satin-finished, and anodized. Aluminum sheets or aluminum foil can be cut into coils as per the client’s requirements.
CHAL Aluminum Corporation is a fully integrated aluminum manufacturer and supplier that provides all kinds of aluminum products and technical solutions. We are committed to being the leading supplier of aluminum plate, cast tooling aluminum plate, aluminum sheet (clad or bare), aluminum foil (clad or bare), aluminum strip (slit coil), aluminum circle, and aluminum coil. As for CHAL aluminum coil, we supply aluminum sheet coil and aluminum foil coil in a wide variety of alloys and thicknesses.
Features of Aluminum Coil
1. Good temperature resistance
The melting point of aluminum is 660 degrees, and the general temperature does not reach its melting point.
2. Excellent Corrosion resistance
Because of its tight surface oxide film, it has strong adhesion, oxidation resistance, acid resistance, alkali resistance, corrosion resistance, decay resistance, and UV resistance.
3. Color uniform, long-lasting, even, and delicate
Soft and colorful, avoiding the individual chromatic aberration of traditional spraying, no matter how large the ceiling, its color, and color are consistent, lasting, and new.
4. Rigid joint, extremely high strength of the board
Rigid and tough combination, free to cut, slit, arc, balance, drilling, joint fixation, and edge compression molding.
5. Environmental protection
Not easy to turn yellow, using chromium-free treatment liquid to make up for the defects of easy discoloration of the laminating board; the roller paint contains active chemical molecules, which promote the formation of a protective layer on the surface of the material. Active chemical molecules are stable and easy to recycle, meeting environmental requirements.
