NEWS
Searching for high-quality galvanized steel plates for home appliance production? You've found the right partner. As a trusted steel supplier, GNEE Steel provides food-grade and corrosion-resistant galvanized steel plates tailored for home appliance manufacturing. In this guide, we'll explain why our products are the top choice for fridges, washing machines, and other appliances, plus share technical details and ordering information.

Galvanized steel plates
Galvanized steel plates are steel sheets with a zinc coating that combines strength and rust resistance. For home appliances, they need additional properties-like smooth surfaces, precise dimensions, and non-toxic coatings-to meet safety and aesthetic standards.
Commonly used grades for home appliances include DX51D+Z and DX53D+Z, which offer excellent formability for shaping into appliance shells, inner liners, and structural parts.
Key Features of GNEE Steel's Galvanized Steel Plates for Home Appliances
Our galvanized steel plates for home appliances have unique features that meet industry demands:
- Smooth surface finish: With a surface roughness (Ra) of ≤1.6μm, our plates are perfect for painting or laminating-ensuring a flawless appearance on appliance exteriors.
- Food-safe coating: The zinc coating contains no heavy metals (Pb, Cd <10ppm), complying with FDA and EU food contact standards for fridge inner liners and washing machine drums.
- Excellent formability: High elongation rates (≥28% for DX51D+Z) allow deep drawing and complex stamping-critical for shaping appliance parts like curved fridge doors.
- Uniform thickness: Thickness deviation is within ±0.03mm, ensuring consistent performance during stamping and avoiding material waste.
- Low oil content: Surface oil content is controlled at ≤5mg/m², preventing contamination of appliance components and ensuring good adhesion for subsequent processing.
Specifications of Galvanized Steel Plates for Different Home Appliances
Different home appliances require specific galvanized steel plate specifications. GNEE Steel offers customized solutions for each category:
| Appliance Type | Recommended Grade | Thickness Range | Coating Weight | Key Requirement |
|---|---|---|---|---|
| Fridge shells | DX51D+Z | 0.4-0.8mm | 60-80g/m² | Smooth surface, good paint adhesion |
| Fridge inner liners | DX53D+Z | 0.3-0.5mm | 40-60g/m² | Food-safe, high formability |
| Washing machine drums | S220GD+Z | 0.8-1.2mm | 80-100g/m² | Corrosion resistance, impact resistance |
| Oven exteriors | DX52D+Z | 0.6-1.0mm | 80-100g/m² | Heat resistance, scratch resistance |
| Air conditioner casings | DX51D+Z | 0.5-0.7mm | 60-80g/m² | Weather resistance, light weight |
We can also adjust parameters like coating thickness and surface finish based on your specific appliance design requirements.
Mechanical and Chemical Properties of Appliance-Grade Galvanized Steel Plates
GNEE Steel's galvanized steel plates for home appliances meet strict mechanical and chemical standards. The tables below outline key properties:
-
Mechanical Properties
| Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) | Hardness (HV) |
|---|---|---|---|---|
| DX51D+Z | ≥235 | 315-500 | ≥28 | ≤140 |
| DX53D+Z | ≥210 | 270-410 | ≥34 | ≤130 |
| S220GD+Z | ≥220 | 330-450 | ≥26 | ≤135 |
-
Chemical Composition (DX51D+Z, %)
| Element | C | Mn | P | S | Si | Al |
|---|---|---|---|---|---|---|
| Content | ≤0.12 | ≤0.60 | ≤0.045 | ≤0.045 | ≤0.10 | ≥0.02 |
These properties ensure the steel plates can withstand the stresses of appliance assembly and daily use-like repeated opening/closing of fridge doors or high-speed rotation of washing machine drums.
Quality Control and Certifications for Appliance-Grade Galvanized Steel Plates
To meet home appliance industry standards, GNEE Steel implements strict quality control:
- 100% surface inspection: Each galvanized steel plate is checked for defects like scratches, dents, or zinc spangles using automated optical inspection systems.
- Coating thickness testing: Magnetic thickness gauges measure coating weight at 5 points per sheet, ensuring uniformity.
- Formability testing: Regular deep drawing and bending tests verify the steel's ability to withstand appliance manufacturing processes.
- Chemical analysis: Spectrometers test the chemical composition of each batch to prevent harmful elements.
Our galvanized steel plates for home appliances have obtained multiple certifications:
ISO 9001 Quality Management System
FDA Food Contact Certification
RoHS Compliance (for electronic appliances)
CE Certification (for EU market)
Ordering and Delivery for Home Appliance Manufacturers
GNEE Steel offers flexible ordering options for home appliance manufacturers:
- Custom cutting: We provide precise cutting to your required dimensions (up to 2000mm width) to reduce your on-site processing time.
- Bulk and small orders: Minimum order quantity is 3 tons for standard grades, and 5 tons for customized grades.
- Fast delivery: Lead time is 5-8 days for standard products, and 10-12 days for customized products.
- Sample availability: Free samples (up to 5 sheets) are available for testing before bulk orders.
The 2026 reference price for DX51D+Z (0.5mm thickness) is $810-$850 per ton (ex-factory). For bulk orders over 50 tons, we offer 5-8% discounts.
GNEE Steel's galvanized steel plates are the perfect choice for home appliance manufacturing, with food-safe properties, excellent formability, and strict quality control. Our products meet the highest standards for fridges, washing machines, and other appliances, helping you create durable, high-quality products.
If you're a home appliance manufacturer looking for reliable galvanized steel plate suppliers, don't hesitate to contact us. Send your appliance specifications to GNEE Steel today, and we'll provide a customized solution and competitive quotation!









