In order to achieve the goals of automobile weight reduction, energy saving, anti-corrosion, anti-pollution, anti-noise, safety and comfort, etc., a series of cold-rolled automobile sheets with different characteristics have been gradually formed, among which the main ones include: deep-drawing steel plate series aimed at improving formability; High-strength steel plate series aimed at vibration reduction and energy saving; surface-treated steel plate series aimed at improving automobile anti-corrosion capabilities; special steel plates aimed at developing high-performance automobiles, etc.
1Deep drawn steel plate
Cold-rolled plates are divided according to stamping grade: commercial grade (CQ), ordinary stamping grade (DQ), deep drawing grade (DDQ), extra deep drawing grade (EDDQ) and super deep drawing grade (S-EDDQ). Among the sheets for cars, about 72% of the cold-rolled sheets are required to have deep drawing properties of DQ level and above, and more than 95% of the galvanized sheets are required to have deep drawing properties of DQ level and above.

2 high strength steel plate
High-strength automotive sheets are divided into three categories: ordinary stamping grade, deep drawing grade and ultra-deep drawing grade according to the stamping grade. According to the strengthening mechanism, there are four main types:
3Solid solution strengthened phosphorus-added steel plate
By adding phosphorus, the ferrite is solid solution strengthened to improve the strength. Its strength levels are 320MPa and 360MPa. Phosphorus-added high-strength steel plates have excellent formability. The plastic strain ratio r value of deep-drawing grade high-strength steel plates is 1.4~1.6, and the plastic strain ratio r-value of ultra-deep drawing grade high-strength steel plates can reach 2.0.

4Dispersion strengthened high strength low alloy steel plate
By adding Mn, Cu, Mo, V, Ti, Co and appropriate controlled rolling and cooling process, dispersion strengthening, grain refinement and recovery strengthening are produced to improve the strength. Its strength levels are 380MPa, 420MPa, 460MPa, 500MPa and 540MPa. The tensile strength of Cu precipitation strengthened steel can reach 610MPa, and the plastic strain ratio r value can reach 1.9. After adding Mn, the tensile strength of IF steel reaches 440MPa, and the plastic strain ratio r value is 1.5~2.0.








