Reasons for the formation of "adsorbed particles" on the surface of extruded aluminum profiles
The main reasons for the formation of "adsorbed particles" are as follows:
1. The impact of molds
In extrusion production, the mold operates under high temperature and pressure, resulting in elastic deformation. The working strip of the mold starts parallel to the extrusion direction, and after being subjected to pressure, the working strip deforms into a trumpet shaped shape. Only the blade part of the working strip contacts the aluminum formed by the profile, similar to the tool chips of a turning tool. During the formation process of aluminum adhesion, particles are constantly carried out by the profile and adhere to the surface of the profile, resulting in "adsorbed particles".
2. Impact of extrusion process
The correct selection of extrusion process parameters is also an important factor affecting the "adsorption of particles". If the extrusion temperature is too high and the extrusion speed is too fast, there will be more "adsorbed particles". The reason is that due to the high temperature and speed, the flow speed of the profile increases, the degree of mold deformation increases, the flow of metal accelerates, and the deformation resistance of the metal is relatively weakened, making it easier to form the phenomenon of aluminum adhesion.
3. Impact of Casting Rod Quality
The quality of the casting rod is an important factor affecting the surface and extrusion forming of aluminum profiles. The formation of "adsorbed particles" is closely related to the quality of the casting rod. The common structural defects of cast rods include slag inclusion, looseness, coarse grain size, segregation, bright grain size, etc. All of these cast rod defects have a common feature, which is poor welding with the cast rod substrate, resulting in discontinuous flow of the substrate, which is an important factor in the formation of "adsorbed particles".
The main influencing factors of "adsorbed particles" are mold, casting rod, and extrusion process. The operational level of operators is also reflected in these three elements. Based on production practice, continuous analysis of problems and summary of experience can reduce or avoid "adsorbed particles", greatly improving the yield and production efficiency of profiles.









