Stock Roofing Sheet-Material Specification
Roofing sheets are a cost effective way to add shelter to outdoor areas, or layer on top of existing roofs for additional protection against the elements.
PPGI--PRE PAINTED GALVANISED IRON
Material Confirm to : IS 277, IS 513 & IS 14246
Coating On : Hot Dip Galvanised Iron
Thickness : Standard Thickness of 0.50mm TCT
Zn Coating (GSM) : Zn 120
Paint Systems : Regular Modified Polyster Paint (RMP) Optional (SMP & PVdF)
Mpa : 245 Mpa
Primer Service Coat : 5µ microns Epoxy/
Top Coat (Expossed Surface) : 18µ to 20µ
Bottom Coat : 5µ to 7µ
BARE GALVALUME-GALVALUME MILL FINISH
Material Confirm to : AS 1397
Coating On : Cold Rolled Steel
Thickness : Standard Thickness of 0.47mm TCT
AL-An Coating (GSM) : AZ 150
MPa : 245 / 350 / 550 Mpa
PPGL--PRE PAINTED GALVALUME STEEL SHEETS
Material Confirm to : AS 1397
Coating On : Galvalume
Thickness : Standard Thickness of 0.50mm TCT
AL-An Coating (GSM) : AZ 150
Paint System : Regular Modified Polyster Paint (RMP) Optional (SMP & PVdF)
Mpa : 245 / 350 / 550 Mpa
Primer Service Coat : 5µ microns Epoxy/
Top Coat (Expossed Surface) : 18µ to 20µ
Bottom Coat : 5µ to 7µ
