Aluminium Strip Roll

What Is Aluminium Strip Roll

Aluminum strip roll are long, thin, continuous coils of aluminum that have been processed by a rolling mill. The raw material of aluminium strip roll is aluminum coil, and the rolling process is to pass the aluminum coils through a series of rolls and cut them into strips of aluminum with smaller widths.

Aluminum strip coils are commonly used in a variety of industrial applications such as packaging, construction, electronics and transportation.

Specifications Of Aluminium Strip Roll

Aluminium strips are generally obtained by cutting aluminum coils, and the alloy state is determined according to customer requirements or uses. The following are the general specifications of aluminium strip rolls produced by huawei aluminum:

Applications And Specifications Of Aluminum Strip Roll

With unique properties such as corrosion resistance, light weight, good electrical conductivity and easy manufacturing, aluminum strip rolls are widely used in the electrical industry, packaging industry, construction industry, etc.

The following are some examples of typical applications.

1. Aluminum strip for transformer

Transformer aluminum strip is the key raw material for manufacturing dry-type transformer windings (circuit part), which requires high conductivity, so it is usually made of alloy 1060/1070, O temper material.

2. Insulating Glass, Aluminium Spacer

3. Aluminium-plastic composite pipe

material structure	PEX/AL/PEX, PERT/AL/PERT
alloys and temper	1050/1100/3003/8011/8006, O
Common aluminum strip thickness	0.17-1.0mm
common Aluminium-plastic composite pipe thickness	2.0-3.0mm
Common aluminum strip width	20-200mm
Inner diameter	152/300/400mm
Outer diameter	1000-1500mm
It is important to note that when buying aluminum strip, the suitability of the thickness has a lot to do with the specific production process. What Is Aluminium Strip Roll Aluminum strip roll are long, thin, continuous coils of aluminum that have been processed by a rolling mill. The raw material of aluminium strip roll is aluminum coil, and the rolling process is to pass the aluminum coils through a series of rolls and cut them into strips of aluminum with smaller widths. Aluminum strip coils are commonly used in a variety of industrial applications such as packaging, construction, electronics and transportation. Specifications Of Aluminium Strip Roll Aluminium strips are generally obtained by cutting aluminum coils, and the alloy state is determined according to customer requirements or uses. The following are the general specifications of aluminium strip rolls produced by huawei aluminum: Thickness 0.2-4.0mm Width 8-900mm The narrowest width is related to the thickness thickness 0.2-1.0mm min. width 8mm; thickness 1.0-2.0mm min. width 15mm; thickness 2.0-4.0mm min. width 25mm; Inner diameter 300/400/505 common   Core material coreless material, aluminum sleeve, paper sleeve Outer diameter Generally, it does not exceed 1400mm, and it is easy to collapse and uneven winding if it is larger. Standard GB/T3190-2008, GB/T3880-2006, ASTB209, JIS H4000-2006, ISO9001,etc Applications And Specifications Of Aluminum Strip Roll With unique properties such as corrosion resistance, light weight, good electrical conductivity and easy manufacturing, aluminum strip rolls are widely used in the electrical industry, packaging industry, construction industry, etc. The following are some examples of typical applications. 1. Aluminum strip for transformer Transformer aluminum strip is the key raw material for manufacturing dry-type transformer windings (circuit part), which requires high conductivity, so it is usually made of alloy 1060/1070, O temper material. Thickness 0.2-3.0mm Width 20-1650mm Resistivity 0.028 ohm·m (Ω·m) Conductivity ≥ 61.05% of IACS Quality Smooth surface, no scratches, no oil stains, no burrs and warpage on the edges, sometimes chamfering is required. 2. Insulating Glass, Aluminium Spacer Common thickness 0.19-0.3mm Common width 27-53mm Common alloy grades 1050/1060 H18 (cast and rolled) or 3003 H18/H19 (hot rolled) Alloy recommendation Finished hollow aluminum strip at 90° bend, requiring one piece, preferably using 3003 H18/H19, which can achieve the performance requirements. 3. Aluminium-plastic composite pipe material structure PEX/AL/PEX, PERT/AL/PERT alloys and temper 1050/1100/3003/8011/8006, O Common aluminum strip thickness 0.17-1.0mm common Aluminium-plastic composite pipe thickness 2.0-3.0mm Common aluminum strip width 20-200mm Inner diameter 152/300/400mm Outer diameter 1000-1500mm It is important to note that when buying aluminum strip, the suitability of the thickness has a lot to do with the specific production process.