Aluminum Alloy Magnesium Wire

What is Aluminum Alloy Magnesium Wire?

Aluminium Magnesium Alloy is one of the typical aluminum wire coating materials. The addition of manganese to aluminum increases strength somewhat through solution strengthening and improves strain hardening while not appreciably reducing ductility or corrosion resistance. The major composition of Al-Mg alloy wire is aluminum. A small amount of magnesium is added to enhance the strength. With excellent anti-corrosion properties, lightweight, low density, good heat radiation, and strong resistance to pressure, it can meet 3C products’ requirements, which demand high integration, miniaturization, electromagnetic shielding, etc. Its hardness is several times bigger than glass wire, but the weight is only 1/3. Now it is widely used in the waterproof and shielding layer of cable or outer conductor of AN.

Products Details of Aluminum Alloy Magnesium Wire

1. Specifications of Aluminum Alloy Magnesium Wire

Aluminum grade: 5056, 5154, etc.

Diameter: 0.12mm – 10.25mm

Tensile strength: 220MPa – 345MPa

Electrical resistance: ≤0.054 Ω

Elongation at break: ≥6%

Surface treatment: oxidized

Storage and transportation: according to GB 3199, it shall be stored in a dry and clean warehouse, get rid of heat source exceeding 37℃.

2. Applications of Aluminum Alloy Magnesium Wire

CCAM stranded wire and parallel wire are widely used for: high-frequency signal transmission, leak spilled cable inner conductor, network cable inner conductor, subtle coaxial cable inner conductor, conductive materials of the cable TV coaxial cable, flexible RF coaxial cable inner conductor, computer cable, control cable, and other data cables inner conductor.

Aluminum Magnesium Alloy Wire is used to braid wire as a flexible cord for the connection of electric devices and electrical equipment

Used in shied wired tubes to prevent electric waves

Used in various kinds of CATV coaxial cable, RF cable, date cable, computer cable, electronic magnetic cable, etc.

The petrochemical industry

Hydraulic electric engineering

Port and pier

Water supply

3. Features of Aluminum Alloy Magnesium Wire

Lightweight

Low density

Good heat dissipation

Strong pressure resistance

High electrical resistivity

Good corrosion resistance under high temperature

4. Standard Products of Aluminum Alloy Magnesium Wire

Diameter: 1.62 mm (14 ga); 2 mm (5/64 in); 2.0 mm (0.079 in); 2.3 mm (11 ga); 2.5 mm (0.098 in); 3.2 mm (1/8 in); 4.0 mm (0.157 in); 4.8 mm (3/16 in)

TSW1367 Aluminum Magnesium Alloy Wire (Al-Mg Alloy)

Order Process of Aluminum Magnesium Alloy Wire (Al-MG Alloy Wire)