In the aluminum veneer industry, the quality of good or bad not only affects the decorative effect, but also affects its practicality. So, what are the factors affecting the quality of aluminum veneer in the end?
1, jerry-built materials
With the continuous improvement of the national system of quality control, jerry-built phenomenon has not been as rampant as before, but there are still individual enterprises in order to reduce production costs, desperate, jerry-built in the production of aluminum veneer products, the use of substandard quality of the mold, resulting in aluminum plate wall thickness of the force rod substandard.
2、Mixed raw materials
As the aluminum veneer industry has not yet established a more complete and mature industry standards, so the phenomenon of uneven quality of raw materials. Some enterprises want to win in the fierce competition in the market with low prices, so they use miscellaneous aluminum with different compositions or mixed with recycled aluminum raw materials in the production of raw materials, so as to reduce production costs.
3、Lax supervision
Some enterprises have not established a perfect supervision system, there are loopholes in the supervision of raw materials, so that some chemical elements do not meet the standard of raw materials mixed into it, resulting in the production of aluminum veneer products containing chemical elements seriously exceed the standard phenomenon.
4、The measurement is not timely
In the aluminum veneer coating process, it is necessary to configure the solution virus. If in the process of configuration, no configuration according to the relevant provisions, the determination of the solution concentration is not timely, it will cause the oxide film is thin, can not reach the standard thickness.
5、Falsification
The settlement basis of aluminum veneer products is that the settlement basis between the dealer and the customer is the area, and the settlement basis between the dealer and the manufacturer is the weight, and the settlement basis is different, which makes some manufacturers speculate and make a big deal on the wall thickness issue.
