Grain-non-oriented and grain-oriented steel strips
Grain-non-oriented cold-rolled strip is usually used as the core of motors or welding transformers; grain-oriented cold-rolled strip is used as the core of power transformers, pulse transformers, magnetic amplifiers, etc. Cold-rolled oriented thin silicon steel strip is made from 0.30 or 0.35mm thick oriented silicon steel strip, which is then pickled, cold rolled and annealed.

The cold-rolled non-oriented silicon steel sheet is made by hot-rolling the billet or continuous casting billet into a coil with a thickness of about 2.3mm. Cold-rolled electrical steel strip has the characteristics of smooth surface, uniform thickness, high stacking coefficient, and good punching performance. It has higher magnetic induction and lower iron loss than hot-rolled electrical steel strip.
Using cold strip instead of hot-rolled strip to manufacture motors or transformers can reduce the weight and volume by 0%-25%. If cold-rolled oriented strip is used, the performance will be better. Using it instead of hot-rolled strip or low-grade cold-rolled strip can reduce the power consumption of the transformer by 45%-50%, and the transformer performance will be more reliable.

Definition of non-oriented silicon steel sheet
Non-oriented silicon steel sheets are silicon steel sheets that form a non-oriented deformation texture crystal structure according to a certain production process.








