The full name of SECC is Steel, Electrolytic Zinc-coated, Cold-rolled Coil, which is a steel plate that is electrolytically galvanized after cold rolling. The surface is electrolytically galvanized to have better anti-corrosion performance and aesthetics. It is usually used to manufacture products with low anti-corrosion performance and decorative requirements, such as home appliance casings, instrument casings, etc.

SECC galvanizing method:
Hot-dip galvanizing: Hot-dip galvanizing is an anti-corrosion treatment that forms a zinc layer on the surface of steel. It is to immerse steel plates or steel parts into molten zinc liquid that is preheated to an appropriate temperature (usually 450-480 degrees Celsius), and form a thicker and dense zinc-iron alloy coating on the surface of the steel parts through reaction. Protect steel parts from corrosion. Compared with electrolytic galvanizing, hot-dip galvanizing has higher corrosion resistance and longer service life, and is usually used to manufacture important products such as large structural parts, ships, bridges, and power generation equipment.
Continuous galvanizing method: Rolled steel sheets are continuously immersed in a plating bath containing dissolved zinc.

Plate galvanizing method: The cut steel plate is immersed in a plating bath, and there will be zinc spatter after plating.
Electroplating method: electrochemical plating. There is zinc sulfate solution in the plating tank, with zinc as the anode and the original steel plate as the cathode.








