Gnee Steel (tianjin) Co., Ltd
+8615824687445
Contact Us
  • Mob: +8615824687445
  • Email: ppgi@gescosteel.com
  • Add: No.4-1114, Beichen Building, Beicang Town, Beichen District, Tianjin, China

What Are The Main Factors Affecting Corrosion Of Galvanized Sheets?

Nov 28, 2023

1. Corrosion process of galvanized sheets

sheets


During the entire service life of galvanized sheets, the first corrosion that occurs is the oxidation of the zinc coating on the surface, resulting in "white rust". After a while, the "white rust" on the surface further reacts with impurity gases such as carbon dioxide in the humid air to form "black spots". When galvanized sheets are used for a long time and the corrosion of the galvanized layer becomes serious, the steel base loses the "sacrificial anti-corrosion" effect of zinc and begins to oxidize, forming "red rust". Once the steel base begins to oxidize, the corrosion rate becomes very rapid and the galvanized sheet ends its life.


galvanized sheet

2. Main factors affecting galvanized sheet corrosion

1. Relative humidity

The amount of water vapor contained in the air is expressed as humidity. When the temperature is constant and the relative humidity is low, the corrosion is very slow; when the relative humidity gradually increases and reaches a certain limit, the corrosion rate suddenly increases significantly.

 

​​​​galvanised sheet

2. Temperature

Under certain humidity conditions, when metal corrodes, the corrosion rate increases to about 2 times for every 10°C increase in temperature. When the temperature is greatly reduced, it will cause condensation on the metal surface, leading to accelerated corrosion. If the temperature difference between day and night is large, or the temperature difference between indoor and outdoor is large, condensation will occur. Rust is most severe when condensation occurs periodically. In humid and mildewy weather, especially in hot, rainy or foggy areas or seasons with high relative humidity, metal corrosion is prone to occur.

3. Oxygen

Moisture and oxygen are the main factors in the corrosion of metal in the atmosphere. The water film adsorbed on the metal surface in the atmosphere is very thin, and oxygen can easily dissolve and penetrate into it. This makes the oxygen depolarization process go smoothly and plays a major role in atmospheric corrosion.

4. Pollution factors

When there is pollution in the air or the metal surface is unclean, the metal will also corrode quickly at low relative humidity. When the humidity continues to rise at the critical relative humidity, the corrosion rate also gradually increases further.